Home   Builder's log

Andy Werback's Legacy Project : Closing the Wings

10 - 24 - 2004

Wings come ready to be closed. All that's required is a complete sanding where the top and bottom are bonded and a (very) careful inspection. Once the the Hysol cures, you've got a wing! (well, a little finishing work is needed)

IMG_0108.jpg
Inspecting the wing prior to bonding the top skin

IMG_0143.jpg
Clean the wings - We've already carefully sanded everything that will be bonded

IMG_0146.jpg
Making a good impression. Things move fast when getting ready to flox. This was done in order to wet both sides with adhesive, then flox is applied

IMG_0148.jpg
Wing has been wetted, floxed and the top skin is in place. Adding weights and cleaning up

IMG_0150.jpg
Mixing the flox for the other wing

IMG_0153.jpg
Bonding the wing center section to the fuselage

Home   Builder's log
All content not otherwise protected is © 2004 - 2025 by Andy Werback
EAA Chapter 62 provides this builder's log as a service to its members so that those who would like to build an aricraft can learn from those that do.
Questions and Feedback can be sent to Webmaster.
Web hosting donated by Hurricane Electric.